For contractors and installers

Check the drawing in 3D, before construction.

Arqetta turns the tender drawings into a 3D model within a minute. So in work preparation you see whether everything fits, take quantities from the model and see where pipes and systems have room.

  • Check drawings in 3D
  • Quantities from the model
  • See room for building services
8.400Plasterwork126 m²

Why a 3D model in work preparation?

It often fits on paper, but not on site. A 3D model shows where walls, floors and the roof meet before anything is built. Arqetta makes that model in about a minute from the drawings you already have, so you find errors at your desk instead of on site.

How to use it in work preparation.

1

Upload the drawings

Floor plans, section and elevations from the tender documents or the architect, as DXF or PDF.

2

Walk through the model

View the building in 3D and find the places where the drawing does not add up.

3

Take what you need

Quantities such as m² of plasterwork, and the room for pipes and systems.

What you need

A floor plan per storey, at least one section and the elevation drawings, as DXF or PDF. A floor plan alone is not enough: without a section and elevations there are no heights to build the 3D model from.

The more precise your drawing, the more precise your 3D model. Dimensions and levels that are right in your drawing are right in the model too.

Fewer failure costs.

Find errors at your desk

Spot clashes in 3D before they cost money on site.

Quantities from the model

Take areas such as m² of plasterwork or floor from the model for your costing.

Installers see the room

See in 3D where pipes, ducts and systems fit.

Frequently asked questions.

Can I take quantities from the model?

Yes, you can take areas from the SketchUp model, such as m² of wall or floor. Check them before using them in a costing or quote.

Do I see clashes between services and structure?

You see in 3D where walls, floors and the roof are and where there is room. We do not draw in building services; you model those in SketchUp.

Which drawings do I need?

A floor plan per storey, at least one section and the elevations, as DXF or PDF. We cannot build a 3D model from a floor plan alone.

What does it cost per project?

Viewing is free. A single project costs €1.00 per m² with a minimum of €250; your first project is 50% off. With a plan you pay from €0.24 per m².

Send us one drawing.

View your model for free in your browser. If you download it, you pay half for your first project and receive the file by e-mail.

View your first model freePay only on download

Upload drawing